Solvents
Distribution of chemicals:
- Acids, alkalis
- General chemicals
- Custom-made products
- Solvents
Our product range:
- Acetone
- Butyl acetate
- Di ethylene glycol
- Ethyl acetate, acetic acid
- Phosphoric acid 74%, 75%, 85% (technical and food grade)
- Glycerin (pharmacopoeial and technical quality)
- Isopropyl alcohol
- Calcium chloride (in the form of food and technical grade powder or granules)
- Monoethylene glycol
- Monopropylene glycol (USP, HP, technical grade)
- Sodium hydroxide (solution, scaly)
- Hydrochloric acid, nitric acid
- White spirits
- Triethylene glycol
domestic solvents
Diluents, solvents
Nitro thinner:
Used to dilute nitrocellulose-based varnishes and paints. Also suitable for washing screen frames. Thanks to its low boiling point components, it provides faster surface drying, but the curing time does not change. It is also suitable for surface preparation, degreasing and cleaning due to its good degreasing effect.
White spirit:
It is mainly recommended for diluting oil paints and alkyd resin binder paints. For all paints where the instruction manual recommends household white spirit to adjust the texture of the product. Can also be used to wash painting tools! Not recommended for degreasing before painting!
Spec. Nitro thinner:
Compared to the standard Nitro diluent, it has better solubility due to its Xylene content. Same use as for Nitro thinner.
Aromatic thinner:
Recommended for diluting vinyl copolymer epoxy ester based paints and varnishes. It can also be used for degreasing, washing tools and removing paint stains.
PU thinner:
It is specially used for diluting and adjusting the texture of polyurethane-based paints and varnishes.
Epoxi thinner:
It is used to dilute and adjust the texture of two-component epoxy-based paints and varnishes.
SX thinner:
It can be used with high efficiency in special painting technologies where a high Xylene content is required. It can also be used for washing and degreasing tools and parts. It is also excellent for degreasing surfaces before painting. It is also suitable for the production, keeping and dilution of alkyd type resins.
Synthetic thinner:
It can be used for washing tools and removing paint stains when working with solvent-based white spirit. Its terpene content promotes brushing, but increases drying time! Suitable for diluting paints and enamels where the user manual specifically recommends it.
Ester diluent:
Recommended for diluting polyurethane and nitrocellulose based paints and varnishes. where the product instructions for use recommend an ester thinner for texture adjustment. Unlike nitro thinner, this product dries more slowly. Also suitable for washing paint tools and removing paint stains.
Cleaners and degreasers
Universal degreasers:
It can be used for cleaning and degreasing various surfaces before painting. Even in small quantities, we can perform very effective cleaning and degreasing by washing, dipping, or by manual or machine methods. It effectively dissolves greases, oils and keeps them in solution for a long time, so it is also suitable for cleaning dirty, dirty parts. The product can be reused after distillation.Stain remover:
Highly effective degreaser and cleaner for both industrial and domestic use. Cleaning and degreasing can be done by washing, dipping, machine or manual. Can also be used on leather surfaces and textiles.
Petrowash ECO:
It can be used effectively for soaking and washing greasy, oily equipment..
Alcoholic products, for disinfectants, cosmetics:
ALKO „B” – denatured alcohol:
Product for degreasing fine mechanical parts and dissolving alcoholic mordants and other preparations. Due to its high alcohol content and purity, it can also be used in particularly demanding applications. It is especially recommended for making high-gloss polishes.Alcosil – cosmetic solvent and extractant:
High purity cosmetic solvent and extractant specifically authorized for cosmetic purposes. Mixture of anhydrous alcohol and ketones.
IPA – isopropyl alcohol:
It is typically used for cleaning laboratory equipment and fine instruments, and is an essential additive for sheetfed printing in the printing industry.
Catering and decoration products
Bioethanol – visual and bio-fireplace fuel liquid:
Mixture of anhydrous alcohols. It can be used as a fuel for modern visual and bio-fireplaces. 1 l Bioethanol can burn with flame for 3-4 hours. Available in odorless and scented (cinnamon, vanilla, orange, gingerbread) versions. We can produce it in other scents if required.Grill lighter – for charcoal grills and chafing:
We recommend it mainly for charcoal grills and to keep food and drinks warm for chafing. Due to its viscosity, it is easy to dispense and its flame is safe. Extremely economical for restaurants, hotels, to keep food and drinks warm.Solvents and solvent mixtures
Featured solvents:
- Acetone
- Isopropyl alcohol
- Ethyl acetate
- Methyl ethyl ketone
Packages:
- 19 l plastic jug
- 190 l plastic barrel
- 900 l IBC
Minimum order quantity for smaller products:
- 1 liter products 12 pieces / carton
- 1.9 liter products 8 pieces / carton
Road marking paints
- Due to the fast drying and high pH of the well-mixed paint, it is only sprayed on the asphalt and concrete in an amount of 500 g / m² with machines made of airtight stainless steel.
- The paint is sold in 30 kg cans, ready to paint, up to 2% water can be added as a dilution.
- Spray 350 g / m² of water-based glass beads on the paint so that they are 50-60% immersed in the paint that has not yet dried.
- Drying time is 10-30 minutes depending on temperature and humidity. Dyeing is not recommended below 10 ºCelsius and above 80% humidity, or the addition of an additive is recommended.
- When spraying is complete, immediately rinse the parts in contact with air with water. If the paint dries, it can still be dissolved in acetone or methyl ethyl ketone. Never add solvent to the water-based paint as it will cause gelling.
Advantages of our products
- Improved / longer lasting value.
- Cost effectiveness
- It dries quickly and causes less traffic disruption.
- Greater road safety.
- Improved Health and Safety.
- Reduced environmental impact.
- Not harmful or safer.
- Better retention of glass beads than solvent paint, which provides significant night-time reflection and durability, so it is not necessary to paint every year, it is enough to use it every year and a half.
Glass beads give the road sign paint its reflective ability, the longer the product performs well, the fewer times it is necessary to repaint a given surface.
From an environmental point of view, our road sign paint meets all 21st century EU requirements, health and ecological conditions, with which we strive to give our name to newer and newer quality products.
Portfolio:
- ECO water-based road paint is white and colored
- CHIC solvent road paint is white and colored
- ZEBRA cold plastic road paint in white and color
- ECHOSTAR glass beads tailored to paint
- ECH Thermoplastics
Wage production, wage filling
TTR ribbons
- SCRATCH RESISTANCE
- LIGHT RESISTANCE
- WATERPROOF
- LIFETIME
- Wax
- Resin
- Wax-Resin mixture
Winding types:
- In
- Out
- Near-Egde
It is important to specify the type of packaging when ordering, the ink ribbons can be IN and OUT, which means where the ink layer is on the substrate. A roll with the pigment layer on the inside will not work with an OUT printer, simply because the print head is not in contact with the substrate.
What is important to know when choosing ribbons:
- Printer manufacturer, type
- Material to be printed
- Quality expectations
UV sterilization
UV disinfection applications
Water sports
UV disinfection systems are effective and safe ways to ensure good water quality in pools and water parks of all sizes.
Aquaculture
Ultraviolet disinfection systems in hatcheries, fish farms and aquariums have allowed operators to maintain or maintain higher yields of healthier stocks.
Laboratories
UV technology is used in pharmaceutical research and manufacturing sites to produce ultrapure process water and to disinfect air, surfaces and laboratory equipment.
Sewage
UV disinfection of wastewater is a chemical-free process that keeps harmful microorganisms safe and provides safe water for residents, workers, and flora and fauna in local water bodies.
Maritime
UV disinfection is used in the marine industry to treat ballast water and as part of an advanced wastewater treatment and drinking water system.
Food and drink
Food and beverage manufacturers are increasingly turning to germicidal lamps to ensure that food, beverages and the areas where they are produced do not contain unwanted pathogens.
Horticulture
UV disinfection is popular in the treatment of water used for horticultural applications as it does not introduce chemicals or by-products that can strain the plants and degrade the quality of the plants.
Packaging and processing
Healthy processing and packaging of foods, medicines and cosmetics is vital to ensure that they reach consumers and still meet the expected high standards.
Drink water
UV disinfection has now been tried, tested and reliably treated worldwide in the treatment of municipal and domestic drinking water.
Mining
UV disinfection of water used in mining processes ensures compliance and prevents the release of unsafe water.
Healthcare
Fungicides are used to disinfect hospital rooms, equipment, and air to help fight hospital-acquired infections.
Oil gas
Onshore and offshore oil and gas production requires the treatment of large amounts of water, which is used for well fracturing, cooling and reuse.